Skip to main content

Autoscan

Autoscan replaces the default method of updating your Plex, Jellyfin, or Emby libraries by the use of webhooks sent from the Connect feature within Sonarr and Radarr. More information can be found here: github.com/Cloudbox/autoscan

Notable benefits of autoscan over Radarr/Sonarr Connect:

  • Will update efficiently the path of the media item(s) only, and not perform a full library scan.
    • This can lighten the use of HDD IO resources as well as remote storage API calls.
  • Has the ability to check for anchor files on a mounts to prevent library updates in the case of a mount being offline.

This installerinstaller, and guideguide, assumes that your Radarr/Sonarr and media server applications such as Plex, Jellyfin, or Emby, are all on the same service

Prerequisites

Autoscan will use a token to gain access to your media server application to perform its update functions.

Plex Token

Jellyfin API Token

  • To create your Jellyfin API token for autoscan first navigate to your Jellyfin menu

jellyfin-menu.png

  • Next select the Jellyfin Dashboard menu

jellyfin-dashboard.png

  • Then select API Keys in the Advanced dashboard menu

jellyfin-api-keys.png

  • Fom here you will need to click the + button to create a new API token

jellyfin-api-keys-add.png

  • Name your API Key and save it using the Save button

jellyfin-api-key-name-save.png

  • Finally, from here you will see your API Key to copy and save so that you may enter it when prompted by the autoscan installer script

jellyfin-api-keys-copy.png

Emby API Token

  • To create your Emby API token for autoscan first navigate to your Emby admin menu

emby-admin-menu.png

  • Then select API Keys in the Advanced menu section

emby-api-keys.png

  • From here select the New Api Key button

emby-new-api-key.png

  • Name your API Key and save it using the Save button

emby-new-api-key-name-save.png

  • Finally, from here you will see your API Key to copy and save so that you may enter it when prompted by the autoscan installer script

emby-new-api-key-copy.png

Disable Media Server's Internal Scans

Autoscan is meant to handle your media center's scanning entirely, so it is recommended to disable your Plex, Jellyfin, or Emby's internal scanning settings to avoid any conflicts.

Disable Plex's Internal Scanning

  • Navigate to your Plex Server Settings >> Library and disable the following:
Scan my library automatically: DISABLED
Run a partial scan when changes are detected: DISABLED
Scan my library periodically: DISABLED

Disable Jellyfin's Internal Scanning

Jellyfin Scan Schedule
  • Navigate to your Jellyfin Menu >> Dashboard >> Scheduled Tasks and select Scan Media Library

jellyfin-library-scan-schedule.png

  • From here you can click the trash icon to delete the Library Scan schedule

jellyfin-library-scan-schedule-delete.png

Jellyfin Individual Library Settings
  • Navigate to your Jellyfin Menu >> Dashboard and select Libraries
  • For each Individual library settings, you will need to disable the Enable real time monitoring feature

Disable Emby's Internal Scanning

Emby Scan Schedule
  • Navigate to your Emby Settings Menu >> Scheduled Tasks and select Scan Media Library

emby-library-scan-schedule.png

  • From here you can click the trash icon to delete the Library Scan schedule

emby-library-scan-schedule-delete.png

Emby Individual Library Settings
  • Navigate to your Emby Settings >> Library and select Libraries
  • For each Individual library settings, you will need to disable the Enable real time monitoring feature

Installation

  • Login to your service via SSH
  • Execute the following command to install autoscan:
bash <(wget -qO- https://scripts.usbx.me/main/autoscan/autoscan-install.sh)

Adding Webhooks to Sonarr and Radarr

After successfully installing autoscan via the script you will see the two Webhook URLs shown that are needed to add to your Sonarr and Radarr instances

Sonarr Webhook

  • Navigate to Settings >> Connect >> + >> Webhook
    Name: autoscan
On Grab: NO
On Import: YES
On Upgrade: YES
On Rename: YES
On Series Delete: YES
On Episode File Delete: YES
On Episode File Delete For Upgrade: YES
On Health Issue: NO
On Application Update: NO
URL: (as shown in SSH terminal per autoscan installer script output)
Method: POST
Username: {username}
Password: (as entered per autoscan installer script prompt)

Radarr Webhook

  • Navigate to Settings >> Connect >> + >> Webhook
    Name: autoscan
On Grab: NO
On Import: YES
On Upgrade: YES
On Rename: YES
On Movie Addded: YES
On Movie Delete: YES
Movie File Delete: YES
Movie File Delete for Upgrade: YES    
On Health Issue: NO
On Application Update: NO
URL: (as shown in SSH terminal per autoscan installer script output)
Method: POST
Username: {username}
Password: (as entered per autoscan installer script prompt)

Optional Setup Settings

Anchors for Mounts

Autoscan has the ability check first for anchor files to prevent library updates in the case of a mount being offline. This can allow the use of the Plex library setting Empty trash automatically after every scan safely to avoid the loss of library metadata in the case of a mount going offline. Use at your own risk

The following assumes you've used our rclone mount guides for your mount locations. If you have custom mount paths and/or multiple mounts, then you will need to modify your anchor file locations accordingly

  • To enable the anchor feature, first run the following command to create the anchor file in the root of your mount.
touch ~/Stuff/Mount/.anchor
  • Next edit your autoscan configuration file at ~/.apps/autoscan/config.yml and uncomment the last 2 lines by removing the # characters making the last two lines like the following example:
anchors:
  - /home/{USERNAME}/MergerFS/.anchor

In .yml and .yaml configurations files, improper use of indentation will prevent the configuration file from working correctly. Its important that no blank space be in front of the anchors: line and 2 blank spaces be in front of the - /home/{USERNAME}/MergerFS/.anchor line.

  • Finally, run the following command to restart your autoscan to apply the changes.
systemctl --user restart autoscan

Use With Multiple Media Servers

The unofficial autoscan installer is only written for installation with a single media server in mind, however autoscan supports all three Plex, Jellyfin, and Emby media servers.

  • If you wish to enable autoscan for additional media servers, you can do so by editing your autoscan configuration file at ~/.apps/autoscan/config.yml
  • Next, find the targets: section in your autoscan configuration file and uncomment the 3 lines for each additional media server you wish to enable
  • Then, replace the <token> value with the respective media server token and/or API Key you wish to add
  • Finally, run the following command to restart your autoscan to apply the changes.
systemctl --user restart autoscan
Back to top